Organic–Inorganic Stabilization of Expansive Tuff Spoil for Cement-Stabilized Pavement Bases: Laboratory Characterization and Field Validation
Year: 2026
Type: article
Abstract: Moisture-sensitive expansive tuff spoil is difficult to utilize directly in cement-stabilized pavement bases because of its susceptibility to water-induced deformation and associated mechanical and volumetric instability. This study developed an organic–inorganic stabilization system based on sodium silicate nonahydrate (Na2SiO3·9H2O) and cationic polyacrylamide (CPAM) and established a staged screening–validation framework combining swelling, mechanical, shrinkage, microstructural, and field evaluations. Within the tested range, the formulation containing 5.0% Na2SiO3·9H2O and 0.5% CPAM reduced the free swelling rate from 5.0% to 0.517%, corresponding to an 89.7% reduction. At 28 d, the mean unconfined compressive strength (UCS), splitting tensile strength (STS), and compressive resilient modulus were 15.61%, 27.0%, and 7.9% higher, respectively, than those of the cement-stabilized control. After Holm adjustment, STS showed statistically significant improvements at all tested curing ages, whereas UCS differed significantly only at 14 d, and compressive resilient modulus showed no statistically significant differences. The 90-d cumulative drying shrinkage strain (CDSS) decreased by 37.8%, while the thermal shrinkage coefficient (TSC) remained lower than that of the control over the tested temperature range. XRD and SEM–EDS analyses indicated that the dominant crystalline phases remained essentially unchanged, while qualitative SEM observations revealed a more compact interparticle morphology and fewer visible macropores in the modified material. These observations suggest possible contributions from improved interparticle bonding and interfacial regulation to the overall performance improvement. A 267-m full-scale expressway test section constructed using double-layer continuous paving achieved upper- and lower-layer compaction degrees of 98.6% and 98.4%, respectively, an average 7-d field UCS of 5.16 MPa, and a surface-evenness acceptance rate above 96%. These results support the feasibility of utilizing moisture-sensitive tuff spoil in cement-stabilized pavement bases under the tested laboratory and field conditions, providing evidence of its constructability and satisfactory early-age performance.
Source: Materials
DOI: 10.3390/ma19224825
Authors: Long Ma, Shen Zuo, Jin Li, Henggen Zhang, Junwei Bi
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7226033022
