Work

Multiscale modeling of friction and wear for rubber-like materials

Year: 2026
Type: dissertation
Abstract: Rubber friction and wear are bidirectionally coupled phenomena. Friction is the driving force behind the abrasion of rubber-like materials in contact with rough substrates. At the same time, surface wear influences the friction properties of rubber. While friction is composed of different contributions like adhesive, hysteresis, and viscous friction, wear mechanisms are classified by their temporal and structural effects, for instance, abrasive, corrosive, and fatigue wear. In this thesis, rubber friction and wear are investigated numerically on different length scales and structural levels using the finite element method. Different one- and two-dimensional surface descriptions are introduced, like the height difference correlation and power spectral density functions, to decompose the rubber's substrate surface into micro-, meso-, and macroscales. By conducting rubber block simulations on each scale, friction features are homogenized to generate scale-dependent friction laws. A multiscale framework is developed to consider normal and tangential adhesion on the microscale and hysteresis friction during the upscaling procedure. The implementation is evaluated by various two- and three-dimensional numerical examples to illustrate its advantages and limitations relative to prevailing analytical and numerical approaches. In collaboration with the Institute for Automotive Engineering at RWTH Aachen University, the multiscale rubber friction tool is validated by linear friction tests on sinusoidal 3D-printed surfaces under dry and wet conditions. As stated in this work, frictional power correlates with the rate of rubber mass loss. However, wear mechanisms and energy intensity levels of sliding rubber blocks and rolling rubber wheels or tires differ significantly. To address this, a nonlinear wear energy evolution approach is developed to consider both deformation slip and sliding. Since the shape of the wearing body changes, it is necessary to update the spatial discretization, i.e., the finite element mesh, of the rubber component. A novel shape optimization algorithm is proposed to minimize the difference between the derived wear volume, which results from the wear model at the contact nodes, and the volume loss produced by moving boundary nodes to obtain the worn configuration of the discretized body. Different element quality metrics and mesh optimization techniques are incorporated into an innovative element re-meshing algorithm to ensure full abrasion of two- and three-dimensional structures. The performance of the re-meshing algorithm is demonstrated using numerical studies with circumferentially symmetric and periodic tire models. In collaboration with the Institute for Dynamics and Vibration Research at Leibniz Universität Hannover and CEAT Tyres Ltd. (Mumbai, India), friction and abrasion tests using rubber blocks and wheels are evaluated to calibrate and validate the presented wear analysis framework.:Notation and abbreviations 1 Introduction 1.1 Motivation 1.2 State of the art 1.2.1 Modeling of friction 1.2.2 Modeling of wear 1.3 Structure of the thesis 2 Tensor analysis 2.1 Tensor notation 2.2 Basis vectors 2.3 Tensor operations 3 Continuum mechanics 3.1 Configurations and kinematics 3.1.1 Configurations 3.1.2 Displacement and deformation gradients 3.1.3 Push-forward and pull-back 3.1.4 Deformation and strain tensors 3.1.5 Time derivatives 3.1.6 Velocity gradient, deformation, and rates 3.1.7 Objectivity 3.2 Balance laws 3.2.1 Stress quantities 3.2.2 Thermal quantities 3.2.3 Balance of mass 3.2.4 Balance of linear momentum 3.2.5 Balance of angular momentum 3.2.6 Balance of energy 3.2.7 Balance of entropy 3.3 Arbitrary Lagrangian-Eulerian formulation 3.3.1 Observers 3.3.2 Configurations and kinematics 4 Finite element method 4.1 Discretization 4.2 Boundary conditions 4.3 Variational formulation 4.4 Linearization 5 Constitutive material models 5.1 Elastic material models 5.1.1 Volumetric strain energy function 5.1.2 Isochoric strain energy function 5.1.3 Parameter identification 5.2 Viscoelastic material models 5.2.1 Linear viscoelasticity 5.2.2 Parameter identification 6 Contact mechanics 6.1 Contact kinematics 6.2 Contact interface constraints 6.3 Contact constraint enforcement 6.3.1 Penalty method 6.3.2 Lagrange multiplier method 6.3.3 Augmented Lagrange method 6.4 Contact concepts 7 Modeling of friction 7.1 Microscopic friction 7.1.1 Adhesion model 7.1.2 Numerical studies 7.1.3 Parameter identification 7.2 Macroscopic friction 7.2.1 Coulomb friction law 7.2.2 Polynomial friction law 7.2.3 Huemer friction law 7.3 Multiscale friction 7.3.1 Scale identification 7.3.2 Analytical models 7.3.3 Numerical models 7.3.4 Numerical studies 7.3.5 Experimental validation 8 Modeling of wear 8.1 Wear models 8.1.1 Wear parameter identification 8.1.2 Wear energy evolution 8.2 Re-meshing 8.2.1 Shape adaption 8.2.2 Element quality metric 8.2.3 Mesh improvement 8.3 Wear analysis framework 8.3.1 Element re-meshing 8.3.2 Global approach 8.3.3 Global-local approach 8.4 Numerical studies 8.4.1 Shape adaption 8.4.2 Element re-meshing 8.4.3 Re-meshing frequency 8.4.4 Global-local approach 8.5 Sliding abrasion 8.5.1 Friction and abrasion tests 8.5.2 Image processing and mesh generation 8.5.3 FE model and simulation setup 8.5.4 Experimental validation 8.6 Rolling abrasion 8.6.1 Friction and abrasion tests 8.6.2 FE models and simulation setups 8.6.3 Experimental validation 9 Conclusion and outlook 9.1 Modeling of friction 9.2 Modeling of wear Appendix A Tensor analysis B Continuum mechanics C Finite element method C.1 Nodal projection C.2 Element library D Constitutive material models E Modeling of friction F Modeling of wear G Regression analysis G.1 Least squares method G.2 Similarity measures, distance metrics, errors, and residuals G.3 Coefficient of determination References
Language: English
Open Access status: green
OpenAlex ID: W7226043380
Cites: 123
Cited by:
Related to: 10