Work

Evaluation of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl) hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-Decahydroacridine] as a Corrosion Inhibitor for Mild Steel in an Acidic Medium

Year: 2026
Type: article
Abstract: The corrosion-inhibition behaviour of [(1E,8E)-9-(4-chlorophenyl)-1,8-bis(2-(2,4-dinitrophenyl)hydrazono)-3,3,6,6-tetramethyl-1,2,3,4,5,6,7,8,9,10-decahydroacridine], an acridine-2,4-dinitrophenylhydrazone derivative, was evaluated for mild steel in hydrochloric acid using the gravimetric weight-loss method. Mild-steel coupons were polished, cleaned, weighed, and immersed in uninhibited acid and acid solutions containing selected inhibitor concentrations. Weight loss was recorded at three-day intervals over 30 days, and inhibition efficiency and surface coverage were calculated from the corrosion-rate data. The uninhibited system showed relatively stable weight loss throughout the exposure period, confirming the corrosive nature of the acid medium. The inhibitor reduced weight loss most effectively at 2 ppm, where inhibition efficiency remained between 72.73% and 75.13%. At 6 ppm, inhibition efficiency decreased to 29.27–33.71%, whereas at 10 ppm it decreased further to 14.99–17.34%. Surface-coverage values followed the same pattern, with the highest values at 2 ppm and lower values at the higher concentrations. These findings indicate that the tested compound reduced mild-steel corrosion under the experimental conditions, with the best performance at the lowest tested concentration. Nevertheless, the concentration-dependent decline in performance requires further investigation. Electrochemical measurements, adsorption-isotherm analysis, replicated experiments, and surface-characterisation studies are required to clarify the inhibition mechanism and confirm the reproducibility of the observed behaviour.
Language: English
Open Access status: diamond
OpenAlex ID: W7226352980
FWCI:
Cites:
Cited by:
Related to: 10