Work

Magnetoshell Aerocapture at Neptune: Plasma-Drag Effective Area, Corridor and Capture Budgets

Year: 2026
Type: article
Abstract: This paper presents a computed design study of a planetary entry system on a single stated operating principle: a superconducting coil aboard the spacecraft inflates a magnetic bubble in the hypersonic flow; the incoming neutral gas is ionized and deflected by the bubble, so drag acts over the magnetopause cross-section — tens of metres across — while most of the flow energy goes into the plasma rather than into a solid surface, and the effective drag area grows as the atmosphere thins. The system is a 1,600 kilogram Neptune orbiter carrying a coil of radius 2.0 metres producing a 0.50 tesla field at the coil, arriving with a hyperbolic excess speed of 8.50 kilometres per second and targeting a captured apoapsis altitude of 60,000 kilometres. The design target is capture at Neptune, where arrival speeds are the highest of any planet and a solid aeroshell of useful size would face severe heating, using plasma drag to obtain a large, self-adjusting capture area. The design periapsis is 1495 kilometres, the corridor is 49.2 kilometres wide, peak deceleration is 3.5 Earth gravities, peak heating is 14.4 watts per square centimetre, the heat load is 18.3 megajoules per square metre, and the thermal protection mass is 15.1 kilograms, a fraction 9.45e-3 of the arrival mass. This is a computed study with a civilian planetary-science purpose and no targeting or weapon application. The system exists on paper to deliver scientific instruments to another world, and every budget in it — corridor, deceleration, heating, descent — is a planetary-science budget. All figures are simulated from the stated assumptions, not measured.
Language: English
Open Access status: green
OpenAlex ID: W7227953666
FWCI:
Cites:
Cited by:
Related to: 10