Work

A Reusable Ceramic-Tile Entry System for an Earth-Return Sample Capsule: Equilibrium Temperature, Tile Thickness and Mass Budgets

Year: 2026
Type: article
Abstract: This paper presents a computed design study of a planetary entry system on a single stated operating principle: a blunt capsule with a large nose radius keeps its peak heating rate low enough that its surface can simply radiate the heat away at equilibrium, protected by reusable ceramic tiles whose thickness is set by how far heat diffuses into them during the pulse — nothing is consumed, and the same shield flies again. The system is a 480 kilogram sample-return capsule of 1.9 metre diameter and 3.0 metre effective nose radius, returning from low Earth orbit at 7.60 kilometres per second with peak heating evaluated at a density of 0.00002 kilograms per cubic metre, protected by tiles of stated density and thermal diffusivity. The design target is a reusable shield for repeat sample-return service, with radiative equilibrium temperature checked against the tile class limit, tile thickness computed from thermal penetration, and shield mass reported for comparison with the ablative alternative. Peak deceleration is 5.94 Earth gravities, peak heating is 19.7 watts per square centimetre, the heat load is 21.6 megajoules per square metre, and the thermal protection mass is 40.5 kilograms, a fraction 0.084 of the entry mass. This is a computed study with a civilian planetary-science purpose and no targeting or weapon application. The system exists on paper to deliver scientific instruments to another world, and every budget in it — corridor, deceleration, heating, descent — is a planetary-science budget. All figures are simulated from the stated assumptions, not measured.
Language: English
Open Access status: green
OpenAlex ID: W7228777627
FWCI:
Cites:
Cited by:
Related to: 10