Work

Ablative Heat-Shield Sizing for a Mars Direct-Entry Capsule: Heat Load, Ablator Mass and Margin Budgets

Year: 2026
Type: article
Abstract: This paper presents a computed design study of a planetary entry system on a single stated operating principle: a phenolic-impregnated carbon ablator shield protects the capsule by sacrificing itself in a controlled way — its resin pyrolyzes, its char layer radiates and insulates, and the mass it loses carries heat away — and the shield is sized directly from the integrated heat load, so the sizing study, not the material, is the design product. The system is a 900 kilogram direct-entry Mars capsule of 3.5 metre diameter entering at 6.10 kilometres per second, with peak heating evaluated at a density of 0.0018 kilograms per cubic metre over a stated heating pulse, sized with a PICA-class ablator of stated effective ablation enthalpy. The design target is a complete shield sizing: peak heating rate, integrated heat load, required ablator areal mass including the structural floor allowance, shield mass and shield mass fraction, each computed and each carrying its margin policy openly. Peak deceleration is 13.1 Earth gravities, peak heating is 179 watts per square centimetre, the heat load is 113 megajoules per square metre, and the thermal protection mass is 114 kilograms, a fraction 0.127 of the entry mass. This work is a computed design study for civilian planetary science, with no targeting or weapon application. Its subject is the safe delivery of scientific payloads through a planetary atmosphere, and its numbers are simulated from stated assumptions rather than measured on hardware.
Language: English
Open Access status: green
OpenAlex ID: W7228825970
FWCI:
Cites:
Cited by:
Related to: 10