Breaking the Porosity‐Strength Trade‐Off in Hierarchical Current Collectors for Lithium Metal Batteries
Year: 2026
Type: article
Abstract: ABSTRACT Porous metallic current collectors can homogenize lithium (Li) deposition and accommodate volume change, but increasing porosity generally compromises mechanical integrity under stack pressure. Here, a mechanically reinforced, gradient‐designed hierarchical current collector (GDH CC) is constructed from an FeNi alloy skeleton, a conformal Cu shell, and Al 2 O 3 ‐modified outer faces. The FeNi‐containing framework reinforces the porous architecture while the spatially differentiated interfaces are designed to favor internal Li accommodation. The 50 µm‐thick CC combines a retained porosity of 80.13% with a compressive yield strength of 0.309 MPa and was examined after passing a nominal Li deposition charge of 8 mAh cm −2 . Cross‐sectional microscopy and in situ optical observations indicate center‐outward plating and reverse stripping within the scaffold. The GDH CC delivers an average Coulombic efficiency of 98.7% for 400 cycles at 1 mA cm −2 and 1 mAh cm −2 and supports stable bidirectional cycling in pouch‐type cells. A multilayer LFP | Li/GDH CC | LFP pouch cell delivers 145 mAh g −1 at 1 C, corresponding to cell‐level gravimetric and volumetric energy densities of 172.49 Wh kg −1 and 297.78 Wh L −1 , respectively. These results identify mechanical reinforcement as an important design dimension for high‐porosity Li hosts.
Source: Small
DOI: 10.1002/smll.76716
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7230136976
