Development and Preliminary Evaluation of a Poka-Yoke Support Hook for Brake Calipers During Brake Pad Replacement
Year: 2026
Type: article
Abstract: Temporarily supporting a removed brake caliper is a necessary part of brake maintenance because the hydraulic hose must not serve as a suspension element. This study examines the design of a caliper support hook made from AISI 1020 steel and interprets the graphical evidence from a static simulation. An applied case study was conducted, integrating a documentary review, an exploratory literature search guided by PRISMA transparency criteria, failure mode and effects analysis (FMEA), and interpretation of four numerical plots and one material data sheet. The model shown contains two hooks, perforated arms, joints, and a diagonal bar. The plot scales show upper limits of 36.56 MPa for von Mises equivalent stress, 0.1925 mm for resultant displacement, and 1.339 × 10⁻⁴ for equivalent strain. The visible distribution concentrates higher stress and strain near the upper-hook transition, while displacement increases toward the loaded lower end. The AISI 1020 data sheet indicates a yield strength of 351.571 MPa, consistent with the displayed minimum factor of safety of approximately 9.6. However, load, contact, and mesh-convergence documentation is missing, so no allowable capacity is established. FMEA ranks unintended disengagement as the highest internal priority, a condition that the structural plot does not verify. The 10.0- and 8.8-minute values represent a projected 12% reduction, not workshop measurements. Improvements to the geometric transition, retention, and joint modeling are proposed, together with a verification plan. No physical prototype exists; drawings remain pending, and an illustrative render is included. The contribution is to connect the available numerical results with design decisions and explicit limits on interpretation.
Institution: Tecnológico Nacional de México, Campus Pachuca
Language: English
Topic: Engineering Applied Research
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7230652275
