Work

A Multifunctional Epoxy–Polyether Network for Chemo‐Mechanical Stabilization of High‐Loading Ni‐Rich Cathodes

Year: 2026
Type: article
Abstract: ABSTRACT High‐loading Ni‐rich cathodes are constrained by coupled ion‐transport limitations, mechanical damage, and interfacial degradation, whereas conventional poly(vinylidene fluoride) (PVDF) binders primarily provide passive particle adhesion. Here, a fluorine‐free epoxy–polyether crosslinked binder network (X‐EP) is developed for high‐loading LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes. Formed through epoxy–amine ring‐opening reactions among bisphenol A diglycidyl ether, polyether‐based diglycidyl ether, and Jeffamine curing agents, X‐EP integrates ion‐accessible polyether segments, hydroxyl‐rich interfacial functionality, and mechanical resilience. Relative to PVDF, X‐EP shows higher electrolyte affinity, Mn 2+ ‐binding capability, binder‐film ionic conductivity, mechanical resilience, and calculated adhesion to NCM811, resulting in reduced polarization and improved apparent Li + transport kinetics. In half cells, X‐EP retains 80.98% of its initial capacity after 100 cycles, compared with 32.30% for PVDF. At an areal loading of ≈20 mg cm −2 , X‐EP retains 78.43% capacity after 400 cycles in coin‐type full cells and 78.29% after 150 cycles in pouch‐type full cells. Post‐mortem analyses reveal suppressed intergranular cracking and interphase growth, together with better preservation of the layered structure. These findings demonstrate a binder‐design strategy that couples ion accessibility, interfacial affinity, and mechanical resilience to stabilize high‐loading Ni‐rich cathodes.
Source: Small
Language: English
Open Access status: bronze
OpenAlex ID: W7233370643
FWCI:
Cites: 54
Cited by:
Related to: 10