Overtopping Reservoir Wave Power: Run-Up Discharge, Stored Head and Low-Head Turbine Budgets
Year: 2026
Type: article
Abstract: The overtopping collector is presented here: a computed overtopping collector design, rated at 503 kilowatts, on the overtopping collector's single stated overtopping collector operating principle: a tapered ramp lets incoming waves run up and spill over a crest into a raised reservoir, converting an oscillating resource into a stored head of water; ordinary low-head turbines then generate from the reservoir's steady drainage — the wave motion is rectified by gravity and a wall, not by any oscillating machinery. The overtopping collector system is a collector with 220 metres of crest, a reservoir head of 3.6 metres and a freeboard of 1.4 metres where the significant wave height is 2.0 metres and energy period 7.5 seconds, with overtopping discharge computed from an exponential freeboard law. The overtopping collector's target is the overtopping collector net electrical output, worked out from the computed mean overtopping discharge per metre of crest, the total inflow, the hydraulic power of the stored head and a stated low-head turbine efficiency, with reservoir volume printed for storage scale. For the overtopping collector, the net output is 503 kilowatts, and the overtopping collector's annual yield is 1.5 gigawatt-hours, at the overtopping collector's capacity factor of 0.34. Mean overtopping is 0.086 cubic metres per second per metre of crest, giving 18.9 cubic metres per second against a head of 3.6 metres. Nothing in this computed study serves any targeting or weapon purpose; it is a civilian energy design whose numbers are simulated from stated assumptions, not measured.
Author: Aldred, William Alexander
Language: English
Topic: Wave and Wind Energy Systems
Subfield: Ocean Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7233542124
FWCI:
Cites:
Cited by:
Related to:
