Overnight Hoar Frost on a Parked Aircraft Wing: Deposition Mass, Feathery Thickness and the Energy Needed to Remove It
Year: 2026
Type: article
Abstract: For the wing frost case, this paper evaluates radiative-cooling deposition, where a wing skin chilled below the surrounding air and below the frost point collects vapour by slow diffusion through calm night air, building a low-density crystalline layer whose removal energy is set by its mass rather than its conspicuous thickness. The case examined is a parked aircraft wing whose skin radiatively cools to minus four degrees Celsius in calm air at three degrees and ninety percent relative humidity, with a diffusivity for vapour of 1.85e-5 square metres each second across a ten-millimetre still-air layer, frost beginning at a density of forty kilograms in a cubic metre rising toward one hundred and fifty its densification time being two hours, a conductivity for the frost of 0.08 watts for a metre and a kelvin, and an eight-hour night. The quantities produced are the mass deposited per square metre over the night, the feathery thickness that mass presents at dawn, the thickness after densification, the total latent heat exchanged, and the energy per square metre required to warm and melt the layer away. The wing frost case in numbers: deposition at 12.2 g/m2/h for the wing frost case, a layer 2.44 mm thick as deposited for the wing frost case, 0.098 kg/m2 of ice for the wing frost case, and 0.659 mm for the wing frost case once densified. A wing can look alarmingly white while carrying surprisingly little ice; the budget separates the visual offence from the physical one, and prices both.
Author: Aldred, William Alexander
Language: English
Subfield: Aerospace Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7233546255
FWCI:
Cites:
Cited by:
Related to:
