K/Ce/Sm multiple-doped CaBi 2 Nb 2 O 9 aurivillius-type ceramics used for high-temperature piezoelectric ultrasonic transducer
Year: 2026
Type: article
Abstract: Aurivillius-type CaBi2Nb2O9 (CBN) is attractive for high-temperature ultrasonic sensing owing to its high Curie temperature (TC ≈ 940 ℃). However, its weak piezoelectric response and loss of polarization alignment during thermal exposure limit its practical performance. Herein, K/Ce/Sm co-substitution at the Ca site was employed to modify the lattice structure, electrical transport, and domain morphology of CBN ceramics. Co-substitution reduced the orthorhombic distortion while preserving the orthorhombic framework. The optimized CBN-KCS-12 ceramic exhibited a piezoelectric coefficient d33 of 18 pC/N, a TC of approximately 933 ℃, and a ρdc resistivity of 2.59 × 106 Ω·cm at 650 ℃, approximately 18.5 times that of undoped CBN. The annealing temperature corresponding to 50% retention of the initial d₃₃ increased from 600 to 850 ℃, and CBN-KCS-12 retained approximately 44% of its initial d33 after annealing at 900 ℃. Piezoresponse force microscopy revealed larger block-like regions in CBN-KCS-12 compared with the fine stripe-like patterns in undoped CBN, with block-like contrast also observed after annealing at 900 ℃. The elastic modulus also increased from 30.1 to 33.8 GPa. Finally, a single-element ultrasonic transducer fabricated from CBN-KCS-12 produced clear pulse-echo signals from room temperature to 400 ℃, achieving a signal-to-noise ratio above 36 dB and a -6 dB fractional bandwidth of approximately 42% at 400 °C. These results demonstrate the potential of multi-element A-site co-substitution for improving CBN ceramics for high-temperature ultrasonic applications.
Source: Journal of Advanced Ceramics
Language: English
Subfield: Materials Chemistry
Field: Materials Science
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,372
OpenAlex ID: W7233551858
FWCI:
Cites:
Cited by:
Related to:
