Work

High-Altitude Balloon-Borne Wind Turbine: Shear-Profile Gain, Altitude Density and Buoyancy Budgets

Year: 2026
Type: article
Abstract: This paper presents a computed balloon-borne turbine design, rated at 8.72 kilowatts, on a single stated operating principle: a helium aerostat carries a shrouded rotor to several hundred metres, where the wind is stronger and steadier than at any tower height; power returns down the tether, and the budget balances the altitude wind gain against the density loss and the balloon's lift requirement. The system studied is a rotor 7 metres in diameter held at 350 metres by an aerostat 18 metres in diameter, with surface wind 6 metres per second, shear exponent 0.16, and rotor power coefficient 0.40 at the computed altitude density. The target quantity is net electrical output from the computed altitude wind speed by the power-law profile, the altitude air density by the exponential atmosphere, and the standard rotor chain, with balloon gross lift printed as the configuration's feasibility check. For the balloon-borne turbine, the net output is 8.72 kilowatts, and the annual yield is 32.1 megawatt-hours, at a capacity factor of 0.42. Wind speed at operating altitude is 10.6 metres per second. Air density at altitude is 1.18 kilograms per cubic metre. Stream power at altitude is 26.9 kilowatts. Aerostat gross lift is 31.7 kilonewtons. The study is a civilian energy design throughout, with no targeting or weapon application, and its results are simulated, not measured.
Language: English
Open Access status: green
OpenAlex ID: W7233565487
FWCI:
Cites:
Cited by:
Related to: