Work

Oscillating Water Column Power in a Harbour Breakwater: Wave-Flux, Pneumatic-Chamber and Wells-Turbine Budgets

Year: 2026
Type: article
Abstract: The breakwater water column is presented here: a computed breakwater water column design, rated at 225 kilowatts, on the breakwater water column's single stated breakwater water column operating principle: a hollow concrete chamber open to the sea below the waterline traps air above an internal water surface; each passing wave raises and lowers that surface, pushing air back and forth through a Wells turbine that spins the same way on both strokes — the sea moves water, the water moves air, and only the air touches machinery. The breakwater water column system is a breakwater chamber 24 metres wide at a site with significant wave height 2.6 metres and energy period 9.0 seconds, driving a Wells turbine through a chamber whose computed capture width is a stated fraction of its physical width. The breakwater water column's target is the breakwater water column net electrical output, derived from the computed deep-water wave flux, the chamber capture width, the pneumatic power in the oscillating air flow and a stated turbine efficiency, with chamber pressure and air-flow rates printed beside the electrical figures. For the breakwater water column, the net output is 225 kilowatts, and the breakwater water column's annual yield is 0.63 gigawatt-hours, at the breakwater water column's capacity factor of 0.32. The incident flux is 29.8 kilowatts per metre, the capture width is 13.2 metres, and pneumatic power before the turbine is 394 kilowatts. This is a computed study with a civilian energy purpose and no targeting or weapon use; every figure in it is simulated from the assumptions stated, not measured on hardware.
Language: English
Open Access status: green
OpenAlex ID: W7233569450
FWCI:
Cites:
Cited by:
Related to: