Work

Vortex-Induced-Vibration Wind Harvester: Strouhal Frequency, Oscillation Amplitude and Micro-Power Budgets

Year: 2026
Type: article
Abstract: This paper presents a computed vibration harvester design, rated at 0.012 kilowatts, on a single stated operating principle: a bluff cylinder on a flexible mount sheds alternating vortices in the wind and the resulting lift oscillation drives the cylinder across the flow; a generator in the mount converts that transverse oscillation to electricity — there is no rotor, only a body tuned so its shedding frequency meets its natural frequency. The system studied is a cylinder 0.25 metres in diameter and 3 metres long, oscillating with amplitude of 0.6 diameters at a wind speed of 6 metres per second, with Strouhal number 0.2 and an extraction coefficient of 0.18 on the swept area. The target quantity is net electrical output in the watts range, computed honestly from the oscillation frequency, the swept area of the stroke and the stream power through it, so the device's true niche — autonomous sensors — is sized by numbers rather than adjectives. For the vibration harvester, the net output is 0.012 kilowatts, and the annual yield is 30.4 kilowatt-hours, at a capacity factor of 0.3. Vortex shedding frequency is 4.8 hertz. Swept area of the stroke is 0.9 square metres. Stream power through the swept area is 0.119 kilowatts. Flow Reynolds number is 102,740. The design exists to supply civilian energy and for no other purpose; it carries no targeting or weapon application, and its figures are simulated, not measured.
Language: English
Open Access status: green
OpenAlex ID: W7233585248
FWCI:
Cites:
Cited by:
Related to: