Variable-Speed Pumped-Storage Unit with a Doubly-Fed Motor-Generator: Speed Range, Part-Load and Response Budgets for a 23 Megawatt Plant
Year: 2026
Type: article
Abstract: This paper presents a computed design for a reversible pump-turbine coupled to a doubly-fed induction motor-generator at a two reservoirs at moderate head serving a wind-heavy grid, operating on the following principle: a power-electronic converter in the rotor circuit lets the unit run above and below synchronous speed, so pumping power can be varied continuously, turbine efficiency can be held near its peak as head changes, and the machine can answer grid frequency events in either mode. A speed range of plus or minus 10% lifts round-trip efficiency to 80%, the reservoirs store 180 megawatt-hours for about 7.7 hours at 23,347 kilowatts, and the unit can move its output materially within 8 seconds. A fixed-speed storage unit pumps at essentially one power, which is a poor match for absorbing variable surplus generation. Variable speed removes that rigidity: in pumping, input follows the surplus; in generating, the runner can be kept near its best speed as the head falls. This study budgets the speed range, the part-load efficiency gain and the stored energy of such a unit, and states the converter rating implication that makes the flexibility possible. All sizing follows from computed head, flow, turbine-efficiency, cavitation and, where the design stores energy, storage budgets, each worked in the deposited calculation script from stated inputs. The study is a design exercise for civilian electricity production; it is simulated, not measured, and no part of it concerns any weapon or targeting application.
Author: Aldred, William Alexander
Language: English
Subfield: Energy Engineering and Power Technology
Field: Energy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7233586650
FWCI:
Cites:
Cited by:
Related to:
