Carbon Dioxide Injectivity into a Deep Saline Aquifer: Pressure Buildup, Plume Radius and Storage-Capacity Budgets
Year: 2026
Type: article
Abstract: For a deep saline sandstone aquifer fifty metres thick with permeability 100 millidarcies and porosity 0.20, receiving supercritical carbon dioxide at one million tonnes per year through a single vertical well, this paper computes a carbon dioxide injectivity and plume budget. Principal quantities for saline storage formation are: mass rate tonnes yr = 1.000e+06 tonnes per year; reservoir volume rate m3 s = 0.0488 cubic metres per second; co2 viscosity Pa s = 5.000e-05 pascal-seconds; pressure buildup MPa = 0.8187 megapascals; pressure buildup bar = 8.187 bar; plume radius 1yr m = 221.3 metres. The plume radius is computed by pore-volume balance and the block capacity at a deliberately conservative efficiency, so the screening comparison between footprint, pressure and capacity rests on stated rather than optimistic assumptions. Every value for saline storage formation comes from deposited code for saline storage formation. Re-running that code for saline storage formation with other published values for saline storage formation revises the pressure buildup MPa of 0.8187 megapascals for saline storage formation directly; remaining quantities for saline storage formation follow: plume radius 30yr km = 1.212 kilometres; injected volume 30yr m3 = 4.615e+07 cubic metres; site area km2 = 100.0 square kilometres; capacity at 2pct efficiency Mt = 13 megatonnes; total pore fill capacity Mt = 650.0 megatonnes.
Author: Aldred, William Alexander
Language: English
Subfield: Environmental Engineering
Field: Environmental Science
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7233588828
FWCI:
Cites:
Cited by:
Related to:
