Work

Flexible-Membrane Wave Power: Bulge-Wave Propagation, Hydraulic Take-Off and Capture-Length Budgets

Year: 2026
Type: article
Abstract: The flexible membrane is presented here: a computed flexible membrane design, rated at 294 kilowatts, on the flexible membrane's single stated flexible membrane operating principle: a long, fluid-filled flexible membrane lying along the wave direction develops a bulge wave that travels inside it in step with the sea wave above; power take-off units at the membrane's end harvest the internal pressure wave — the device couples to the sea along its whole length through a soft, yielding surface with no rigid moving parts in the water. The flexible membrane system is a membrane 60 metres long and 8 metres wide under a significant wave height of 2.5 metres and energy period 8.5 seconds, with a stated capture ratio on its length, a stated internal strain, and hydraulic take-off efficiency. The flexible membrane's target is the flexible membrane net electrical output by way of the computed wave flux over the membrane's effective capture width at the stated hydraulic efficiency, with bulge volume and membrane strain printed because the elastomer's fatigue life, set by that strain, is the design's consumable. For the flexible membrane, the net output is 294 kilowatts, and the flexible membrane's annual yield is 0.747 gigawatt-hours, at the flexible membrane's capacity factor of 0.29. The effective capture width is 22.8 metres along a 60.0 metre membrane, hydraulic power is 594 kilowatts, and the membrane works at 16.0 percent strain. This design study is computed, not measured: a simulation on stated assumptions for civilian energy supply, with neither targeting nor weapon application involved.
Language: English
Open Access status: green
OpenAlex ID: W7233611965
FWCI:
Cites:
Cited by:
Related to: