Reduced-order aerodynamic modelling of a lift-plus-cruise VTOL UAV: flight-envelope assessment and load-conserving reconstruction
Year: 2026
Type: article
Abstract: A traceable reduced-order design workflow is developed for a 13.85 kg lift-plus-cruise vertical take-off and landing (VTOL) unmanned aerial vehicle (UAV). The novelty is a verification architecture – not a new lifting-line relation – that couples archived-data reconciliation, flight-envelope falsification, bounded uncertainty and exact load closure in one reduced-order chain. Thin-airfoil theory and a 20-term Prandtl lifting-line solution are coupled with a bounded parasite-drag scenario, an explicit stall-margin feasibility index, and force-conserving reconstruction of distributed lift, shear force and bending moment. A legacy circulation dataset is an unpublished higher-fidelity numerical distribution retained in the authors’ design archive. Because its original solver settings, speed, density and dimensional force scaling cannot be recovered, it is treated as the available full-order model (FOM) benchmark only for integral-normalized spanwise-shape comparison, not as physical validation. The model predicts a zero-lift angle of –1.92°, a finite-wing lift-curve slope of 0.0903 deg - 1 and a span efficiency factor of 0.977. The nominal maximum lift-to-drag ratio is 16.5, with a bounded scenario range of 15.2-18.2. Relative to the archived benchmark, the reduced-order model (ROM) gives an RMSE of 0.1215, a range-normalized RMSE of 10.1 % and a maximum pointwise normalized deviation of 21.2 % for circulation shape. These are shape errors only and do not establish the absolute accuracy of lift, drag or load magnitudes. Most importantly, the archived 36 km/h wing-borne condition is falsified because it requires lift coefficients of 3.89 at sea level and 5.24 at 3000 m. At 3000 m, even 90 km/h is only statically feasible and does not retain the selected 30 % stall-speed margin; the protected minimum is 97.8 km/h. At a design load factor of 2.5, the reconstructed half-wing root shear and bending moment are 169.8 N and 91.9 N·m. The workflow therefore provides a reproducible screening and load-transfer baseline while explicitly identifying the experiments required for physical validation.
Authors: Jonibek Takhirov, Nuriddin Abdujabarov
Language: English
Subfield: Aerospace Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $215
OpenAlex ID: W7233617447
