Work

Development and Microstructural Investigation of Ni– Mo–FeCrAl Modified 40H Steel for Furnace Roller Applications

Year: 2026
Type: preprint
Abstract: This study investigates the effect of complex alloying on the microstructure and mechanical behavior of modified 40H structural steel intended for metallurgical furnace rollers. The steel was modified with Ni, Mo, Al, and FeCrAl-based additives and subjected to normalization at 880°C, quenching at 860°C, and tempering at 550°C. Microstructural evolution was analyzed by scanning electron microscopy (SEM) with EDS characterization, while hardness was evaluated using Rockwell (HRC), Brinell (HBW), and Vickers (HV) methods. The as-cast condition exhibited a heterogeneous cast microstructure characterized by pronounced dendritic segregation and significant hardness scatter (473–561 HB). After heat treatment, the microstructure developed a more uniform and refined appearance, accompanied by a reduction in hardness scatter. Hardness values stabilized in the range of 42–48 HRC, accompanied by a decrease in measurement dispersion. SEM/BSE observations indicated a more uniform morphology after heat treatment, while local SEM/EDS analysis was used only as a supplementary semi-quantitative tool to evaluate elemental distribution in selected regions. The combined alloying and heat-treatment strategy contributed to microstructural refinement and reduced hardness scatter after heat treatment. These findings suggest that the proposed processing route may be beneficial for the development of 40H steel components intended for furnace roller applications.
Language: English
Open Access status: green
OpenAlex ID: W7233699908
Cites: 18
Cited by:
Related to: 10