Design, Implementation and Experimental Validation of a Low – Cost Modular Electrical Power Subsystem EPS of a CubeSat Flight Demonstrator
Year: 2026
Type: article
Abstract: Electrical Power Systems formerly EPS are fundamental for the CubeSats operation as they must generate, store, regulate, condition and distribute electrical energy to avionics, communication systems, sensor modules and associated payloads under constrained power generation and energy storage conditions. This work presents the actual design, implementation and experimental characterization of a low-cost, modular, functional Electrical Power Subsystem EPS that is developed for a prototype level CubeSat Flight Demonstrator. The developed prototype uses six 5V, 200mA, 1 W photovoltaic panels that are arranged in 3S2P(3 in series and then both series connection in parallel) configuration, an 8-cell 4S2P lithium-ion battery pack, a 4S 40 A Battery Management System, a XL6009 boost with LED display for external charging and a fixed 5V LM2596 regulation and distribution step. The output of this regulation supplies a Raspberry Pi 5-based imaging and receiving subsystem and an ESP 32-based communication and sensing subsystem comprising of GPS, LoRa module, inertial sensing, analog data acquisition and environmental behavioural factors sensing. Despite of purely simulation-based EPS study, the proposed work focuses deeply on hardware implementation and experimental characterization of the complete Power Path from Source – to – Load. Evaluation of the experimental methodology incorporates solar-array characteristics, battery charging and discharge behaviour, power regulation and distribution, converter performance, power consumption of subsystem and battery-supported operation under eclipse conditions. Measured Voltage, Current, Power, Energy and operating time are used to establish the actual power budget and balance energy of this demonstrator. The study also establishes the limitations associated with the use of non – space qualified commercial components and battery cells that are locally manufactured. The resulting system is designated as a laboratory-scale technology demonstrator rather than a flight-qualified space EPS. The study provides a reproducible methodology for the evaluation of COTS-based EPS architectures and demonstrates how subsystem demand measured experimentally can be used to access battery endurance, power margins and eclipse operation in CubeSat Development.
Author: Mudassir Imran
Language: English
Subfield: Aerospace Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7233710104
