A Digitally Trimmable Bandgap Voltage Reference Using a Transmission-Gate Switched Resistor Ladder in 180-nm CMOS
Year: 2026
Type: preprint
Abstract: A bandgap reference is only as good as the silicon it is built on, and silicon never repeats itself exactly. This paper follows one bandgap circuit from its variation-limited state before trim to a digitally corrected one after trim. The core is a folded-cascode-regulated, mirror-based reference in a 180-nm CMOS process with VDD = 1.8 V; the correction is a 3-bit transmission-gate-switched resistor ladder placed in the output branch. Before trim, a 200-point Monte Carlo run swept over all eight codes (− 50°C to 125°C) evaluates successfully at 199 points (99.5%) and has a mean reference of 1.235 V with σ = 80.15 mV (6.5%), a spread of 0.888–1.418 V and a temperature coefficient (TC) of 17.7–2570 ppm/°C, the upper extreme being a single outlier. After trim, a 20-point Monte Carlo run gives a mean of 1.193 V with σ = 51.69 mV (4.3%), a 35% reduction in σ, a spread of 1.112–1.297 V and a TC of 44.9–192.3 ppm/°C. At the nominal corner the reference falls from 1.206 V to 1.183 V over the range, about 105 ppm/°C. The trim step, switch-resistance effects and test-time code selection are analysed.
Source: Research Square
Authors: Rahul Bhadane, Nutan Chaudhari, Akhil Masurkar
Institution: Vidyalankar Institute of Technology
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7233749676
