Evaluation of the mechanical behavior of aluminum/aluminum foam/aluminum sandwich panels fabricated by Bobbin Tool Friction Stir Welding
Year: 2026
Type: article
Abstract: Aluminum Foam Sandwich (AFS) panels are extensively used in rail transportation, aerospace, and military applications because of their lightweight design, high specific strength and stiffness, and impact resistance. This study investigates the mechanical behavior of aluminum foam-to-aluminum sheet joints fabricated using Bobbin Tool Friction Stir Welding (BT-FSW). Based on the tested welding conditions, a traverse speed of 12 mm/min and a rotational speed of 1250 rpm were selected for joint fabrication. The mechanical properties of the welded panels were evaluated through compression, three-point bending, and interfacial shear tests. The welded sample exhibited a maximum compressive stress of 99.1 MPa at a compressive strain of 0.3135, a maximum load of 7250.8 N in three-point bending, and a maximum load of 2104 N in the interfacial shear test. These results demonstrate the feasibility of achieving direct bonding between the face sheets and the foam core through friction stir welding, without the need for additional adhesives or brazing materials. The findings highlight the potential of BT-FSW as a joining technique for aluminum foam sandwich panels, based on the mechanical responses obtained from the conducted tests.
Source: Next Materials
Authors: A. Rezaei, S.M. Zebarjad
Institution: Shiraz University
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,280
OpenAlex ID: W7233752490
