Thermo-mechanical mechanisms in induction-assisted hard turning of SKD61 steel revealed by experimental benchmarking and archived FEM reanalysis
Year: 2026
Type: article
Abstract: This study presents a mechanism-centered thermo-mechanical reanalysis of induction-assisted hard turning of hardened SKD61 steel with high-speed steel tools using a previously published, center-weighted 27-run campaign as the experimental benchmark. No new authenticated cutting simulations were performed; the numerical contribution comprises reanalysis of archived FEM outputs, Johnson–Cook constitutive-sensitivity calculations, and verification-oriented post-processing. At the condition-matched 475 °C reference, the archived FEM cutting force differed from the experimental mean by 1.43%. Sensitivity screening identified the initial yield parameter \(A\) and thermal-softening exponent \(m\) as the dominant local constitutive influences, with the effect of \(m\) increasing with temperature. From 350 to 600 °C, the archived flank-contact-pressure indicator decreased from 920 to 680 MPa, whereas predicted average tool-zone temperature increased from 430 to 525 °C. Under matched cutting parameters, \({R}_{a}\) , \({R}_{q}\) , and \({R}_{z}\) decreased by about 29%, while terminal \(V{B}_{\text{m}\text{a}\text{x}}\) remained broadly overlapping and non-monotonic across the three temperatures. The limited wear subset supports endpoint comparison only, not wear-rate or tool-life inference. The 475 °C condition is therefore interpreted as an intermediate thermo-mechanical state, not a renewed optimum. Conclusions are limited by the archived 2D plane-strain formulation and the absence of independent tool-temperature validation.
Source: Scientific Reports
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7233755143
