Design Blueprint: An Open-Cycle OTEC Plant with Fresh-Water Co-Production Sized by Flash, Cycle and Condenser Budgets
Year: 2026
Type: article
Abstract: Design blueprint derived from the source paper (DOI 10.5281/zenodo.24291556): Warm seawater itself is the working fluid: part of it flashes to steam in a vacuum chamber, drives a low-pressure turbine, and condenses on a surface condenser fed with deep cold water, yielding fresh water as a co-product, with the vacuum system costed line by line. Its operating principle: open-cycle plant with fresh-water co-production, where the sea is working fluid, fuel and product at once, and the condensate stream is drinking water rather than waste. Headline values are ocf surface temperature ocf c = 27; ocf deep temperature ocf c = 5; ocf temperature difference ocf k = 22; ocf carnot efficiency ocf percent = 7.33; ocf adopted cycle ocf efficiency percent = 3.518; ocf warm flow ocf m3 per s ocf = 60. On a dry island the condensate may be worth more than the current: the same vacuum that makes the turbine possible makes the water potable. SIMULATED, NOT MEASURED. Two civilian products leave this plant: electricity and drinking water. Nothing about the design serves any military end; its vacuum chambers and turbines answer to a water-short island's households alone. Status: DESIGN BLUEPRINT — SIMULATED, NOT MEASURED — NOT BUILT. All numbers are simulated values from the source paper's computation, deposited with this blueprint as compute.py and results.json. The design is a civilian science system for Titan aerial exploration and sampling, and has no targeting or weapon application. AI-use disclosure: Dave, an AI research system, assisted with the computation and drafting under the author's direction; author of record William Alexander Aldred.
Author: Aldred, William Alexander
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7233909556
