Experimental Evaluation of Mechanical, Hydraulic and Abrasion Properties of Pervious Geopolymer Concrete Incorporating Recycled Concrete Aggregate
Year: 2026
Type: article
Abstract: This study experimentally evaluated the influence of recycled concrete aggregate (RCA) on the mechanical, hydraulic and abrasion properties of conventional pervious geopolymer concrete produced with a ground granulated blast furnace slag (GGBS)–rice husk ash (RHA) binder. Four mixtures were prepared by replacing natural granite with RCA at 0, 25, 50 and 75% by mass. The binder comprised GGBS and RHA at a mass ratio of 60:40 and was activated with sodium hydroxide and sodium silicate solutions. Specimens were oven-cured at 60 °C for 24 h and then stored under laboratory conditions. Compressive strength was measured at 7, 14 and 28 days; splitting tensile strength, flexural strength, porosity and permeability were determined at 28 days; and abrasion loss was assessed at 56 days. The results, reported as means of three replicate specimens, showed that 28-day compressive strength decreased from 22.8 MPa in the control mixture to 16.5 MPa at 75% RCA, splitting tensile strength from 2.35 to 1.91 MPa, and flexural strength from 3.85 to 3.19 MPa. Porosity increased from 10.5 to 14.0%, whereas permeability increased from 1.2 mm/s in the control to 1.6 mm/s at 50% RCA before decreasing to 1.3 mm/s at 75% RCA. Abrasion loss increased from 12 to 19%. The results indicate a trade-off between mechanical performance and hydraulic response as RCA content increases. Within the materials and test conditions investigated, 25–50% RCA gave the most favourable compromise, although the measured permeability indicates that drainage performance requires further optimisation and field validation.
DOI: 10.64388/ire1725174
Authors: M. B. Fasuba, O. P. Akintunde, G. O. Omoboyede
Institution: University of Ibadan
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7233970811
