Hydrothermal liquefaction of single-use sanitary waste: quantification, characterization and preliminary simulation to study its circular economy potential
Year: 2026
Type: article
Abstract: Single use healthcare textiles and hygiene products (as surgical masks, gowns, caps, booties and disposable diapers) represent a growing waste management challenge worldwide. In Spain, the Seville metropolitan area alone generates approximately 143 tonnes per year of such waste, currently directed to landfill, without recycling, neither energy or material recovery. This work presents: (1) the comprehensive characterization of these waste, by thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and elemental analysis (CHNS), (2) the quantification of generated volumes from municipal and regional data for the Seville area and (3) the proposal of a conceptual design of a continuous hydrothermal liquefaction (HTL) plant as a circular economy solution for their valorization. A continuous HTL process was simulated by Aspen Plus operating at 350 °C, 200 bar, and 15 min residence time with 15 wt% solid feed, incorporating a water recirculation loop to minimize freshwater consumption. Bibliography data according material composition (PP/PE, cellulose and lignocellulosic components) waste were used. The designed plan processes 5320 kg/h of feed slurry, yielding 1030 kg/h of alternative crude oil (HHV > 35 MJ/kg), 2293 kg/h of hydrochar (HHV 30–45 MJ/kg), 531 kg/h of aqueous phase and 66 kg/h of non-condensable gas. An optimized water recirculation strategy (purge ratio 54.3%) saves 4.06 kg of freshwater per kg of waste processed. HTL enables complete valorization of heterogeneous single-use plastic and cellulosic waste into multiple energy-rich products, underpinning a viable circular economy business model.
Institution: Universidad de Sevilla
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7234199651
