Work

Effects of Suspension Stiffness, Vehicle Speed, and Road Roughness on Dynamic Loading of the Drive Axle Housing in a 1.25-Ton Light Truck

Year: 2026
Type: article
Abstract: This paper investigates the effects of rear suspension stiffness on dynamic loading of the drive axle housing of a 1.25-ton light truck under random excitation, in accordance with ISO 8608:2016. A full-vehicle oscillation model was constructed to simulate dynamic loads over a speed range of 20–60 km/h for four road classes: B, C, D, and E. Two evaluation criteria were used: maximum dynamic load coefficient (Kdmax) and minimum dynamic load coefficient (Kdmin). The results show that road surface quality has a greater influence than speed and suspension stiffness. The traction reduction is high, while Kdmax increases from 1.05 to 2.02 (92.4%) when the road class changes from B to E at 60 km/h, and Kdmin decreases from 0.40 to 0.19 (52.5%). For road class E at 60 km/h, when the suspension stiffness increases from 0.5*C to 1.5*C, the Kdmax increases from 1.82 to 2.30 (26.4%), while the Kdmin decreases from 0.22 to 0.17 (22.7%). The worst case is for road class E with a stiffness of 1.5*C, where Kdmax = 2.30, corresponding to a dynamic load exceeding the static load by 130%, and Kdmin = 0.17, approaching the condition of loss of wheel contact with the road surface.
Language: English
Open Access status: hybrid
OpenAlex ID: W7234228783
FWCI:
Cites: 27
Cited by:
Related to: 10