Phase Chemistry and Spatial Organization Govern Chloride Corrosion Behavior of CrFeNi-Based Multi-Principal Element Alloys
Year: 2026
Type: article
Abstract: Phase heterogeneity provides an effective strategy for designing multi-principal element alloys (MPEAs), yet how phase constitution and spatial organization regulate chloride corrosion remains insufficiently understood. Here, the electrochemical corrosion behavior of as-cast equiatomic CrFeNi (AC-CrFeNi), as-cast Cr30Fe30Ni30Al5Ti5 (AC-CrFeNiAlTi), and hot-rolled Cr30Fe30Ni30Al5Ti5 (HR-CrFeNiAlTi) was comparatively investigated in 3.5 wt.% NaCl solution. The Al/Ti-induced transition from a single-phase FCC structure to a face-centered cubic (FCC) and body-centered cubic (BCC) heterogeneous architecture containing hierarchical ordered precipitates reduced the corrosion current density from 15.15 to 9.302 μA cm−2 and increased the low-frequency impedance modulus from 9.457 to 16.702 kΩ cm2. Further reorganization of the FCC/BCC regions into a directional lamellar morphology at unchanged nominal composition enhanced the corrosion resistance, yielding an icorr of 6.47 μA cm−2 and |Z|0.01 Hz of 47.176 kΩ cm2. Electrochemical impedance analysis revealed that the improved corrosion response of the hot-rolled alloy was accompanied by a more capacitive interfacial response and prolonged relaxation behavior. Post-electrochemical characterization revealed localized oxygen-enriched corrosion products, while XRD confirmed the retention of the primary FCC structure in AC-CrFeNi and the FCC/BCC structures in both CrFeNiAlTi conditions, indicating that corrosion remained controlled by microstructurally dependent local attack rather than extensive phase degradation. The results reveal that chloride corrosion in CrFeNi-based MPEAs is governed by the coupling between phase chemistry, local electrochemical heterogeneity, and phase morphology. This work highlights that reorganizing heterogeneous phase architectures provides a viable pathway for simultaneously tailoring mechanical and corrosion performance in advanced MPEAs.
Authors: Qingwei Gao(Conceptualization, Formal analysis, Funding acquisition, Methodology, Writing – original draft), Changzi Chen(Formal analysis, Investigation, Software), Jianfei Wang(Formal analysis, Funding acquisition, Investigation), Huiqiang Huang(Formal analysis, Investigation), Xiaoming Yang(Formal analysis, Investigation, Validation, Writing – review & editing)
Institution: Jingchu University of Technology
Language: English
Topic: High Entropy Alloys Studies
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Award: G3100416621
OpenAlex ID: W7234333934
