Work

Hybrid MPC for dual three-phase PMSMs under open-phase and short-circuit faults

Year: 2026
Type: article
Abstract: This paper presents a unified, constraint-preserving polynomial hybrid model predictive control (MPC) strategy for dual three-phase permanent magnet synchronous motors (DT-PMSMs) under open-phase faults (OPFs) and short-circuit faults (SCFs). For OPFs, a cubic polynomial mixing coefficient approximates the full-range minimum-loss (FRML) optimal solution, guaranteeing rated current limits. For SCFs, a two-stage Lagrange-based compensation cancels the short-circuit magnetomotive force (MMF) and applies the open-phase hybrid strategy. Both fault modes are integrated into a finite control set MPC (FCS-MPC) framework with 12 virtual voltage vectors (VVs) that produce zero harmonic voltage. Experimental validation on a DT-PMSM prototype shows that under healthy conditions the currents are sinusoidal and balanced. Under an uncompensated OPF, the currents become severely distorted and unbalanced (peak > 1.75 p.u.). The proposed OPF controller restores sinusoidal balanced currents within the rated limit (1 p.u.) and suppresses harmonic currents, as seen from the z 1 z 2 trajectories collapsing to a small cluster near the origin. Under an SCF, the controller maintains sinusoidal αβ currents matching the torque reference (0.5 p.u.) while keeping the non-sinusoidal phase currents within the rated limit. Dynamic tests show that under OPF, a load torque step of 6 Nm causes a speed drop of < 6% with recovery in 150 ms and a torque overshoot of 7%; a speed step from 500 to 700 r/min has a rise time of 70 ms with negligible overshoot. The algorithm runs in 80 µs on a TMS320F28335 DSP, confirming real-time feasibility.
Language: English
Open Access status: gold
Estimated APC paid: $2,690
OpenAlex ID: W7234361392
FWCI:
Cites: 25
Cited by:
Related to: 10