Work

Design, Thermal Performance, and Environmental Safety Analysis of a 304 Stainless Steel Al-Quran Disposal Incinerator for State Religious Authorities

Year: 2026
Type: article
Abstract: The respectful disposal of damaged Quranic texts presents a crucial socio-religious and environmental management issue for Islamic religious authorities. In Malaysia, the DepartmenThe respectful disposal of damaged Quranic texts presents a crucial socio-religious and environmental management issue for Islamic religious authorities. In Malaysia, the Department of Islamic Development Malaysia (JAKIM) guidelines specify controlled burning as an approved method. However, existing disposal incinerators operated by state authorities, such as Jabatan Agama Islam Melaka (JAIM), face significant operational issues, including excessive toxic smoke emissions, ergonomic limitations, ash loss due to wind scattering, and performance degradation from 300 kg/day to 150 kg/day after two years. This study presents the design, Finite Element Analysis (FEA), and Computational Fluid Dynamics (CFD) simulation of a redesigned 304 stainless steel Al-Quran disposal incinerator. Concept selection using the Pugh Matrix identified an optimized design incorporating an air blower, smoke filter, dust compartment, and hydraulic lift table. CFD simulations demonstrate that forced aeration elevates internal combustion temperature from 617 °C (blower off) to 1,725 °C (blower on), increasing thermal efficiency and reducing total burning time for 150 kg of paper to under 24 hours. Static FEA using the Von Mises Yield Criterion indicates that while the structure safely supports 300 kg under ambient conditions (FOS = 1.0), thermal stresses at 1,725 °C limit the safe structural payload to 150 kg (FOS = 1.1). To mitigate high-temperature sensitization (425–870 °C) and intergranular corrosion, protective enamel or Ni-Cr composite coatings are evaluated. This integrated engineering solution successfully harmonizes religious sanctity, environmental safety, and operational sustainability for public religious governancet of Islamic Development Malaysia (JAKIM) guidelines specify controlled burning as an approved method. However, existing disposal incinerators operated by state authorities, such as Jabatan Agama Islam Melaka (JAIM), face significant operational issues, including excessive toxic smoke emissions, ergonomic limitations, ash loss due to wind scattering, and performance degradation from 300 kg/day to 150 kg/day after two years. This study presents the design, Finite Element Analysis (FEA), and Computational Fluid Dynamics (CFD) simulation of a redesigned 304 stainless steel Al-Quran disposal incinerator. Concept selection using the Pugh Matrix identified an optimized design incorporating an air blower, smoke filter, dust compartment, and hydraulic lift table. CFD simulations demonstrate that forced aeration elevates internal combustion temperature from 617 °C (blower off) to 1,725 °C (blower on), increasing thermal efficiency and reducing total burning time for 150 kg of paper to under 24 hours. Static FEA using the Von Mises Yield Criterion indicates that while the structure safely supports 300 kg under ambient conditions (FOS = 1.0), thermal stresses at 1,725 °C limit the safe structural payload to 150 kg (FOS = 1.1). To mitigate high-temperature sensitization (425–870 °C) and intergranular corrosion, protective enamel or Ni-Cr composite coatings are evaluated. This integrated engineering solution successfully harmonizes religious sanctity, environmental safety, and operational sustainability for public religious governance.
Language: English
Open Access status: bronze
OpenAlex ID: W7234421890
FWCI:
Cites: 14
Cited by:
Related to: 10