Work

Fused Filament Fabrication of Soda-Lime Glass Feedstocks

Year: 2026
Type: article
Abstract: Additive manufacturing methods are rather seldom used for the fabrication of glass parts. In this work, the knowledge gained from glass injection molding and ceramic fused filament fabrication (FFF) was extended to the usage of the FFF process chain covering the individual process steps compounding, 3D printing and thermal post-processing for the realization of soda-lime glass parts. The selection of suitable feedstock compositions, containing a soda-lime glass filler and a binder system, consisting of polyethylene glycol (PEG), polyvinyl butyral (PVB), and stearic acid (SA) is essential for successful processing. Small cuboid and disk-shaped parts could be first printed and second debound and sintered to parts with relative densities between 94 up 98% depending on the initial feedstock composition. A further extension to the printing of a larger-sized micro reactor possessing internal hollow structures showed the principal feasibility of soda-lime glass FFF printing. Due to the presence of defects after printing, debinding and sintering was omitted. Consequently, further material and process optimization is necessary to eliminate part distortion and other defects, which is mandatory prior to successful process chain evaluation.
Source: Materials
Language: English
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7234448014
FWCI:
Cites:
Cited by:
Related to: 10