Microwave-Assisted Catalytic Pyrolysis of Polypropylene Waste Plastics for Hydrogen-Rich Gas Production with Ni-Fe/γ- Al₂O₃ Catalyst
Year: 2026
Type: preprint
Abstract: Global plastic waste continues to increase, while conventional disposal methods such as landfilling and incineration both waste resources and pollute the environment. Converting polypropylene (PP) into hydrogen offers a potential route toward low-carbon hydrogen production with environmental benefits. This study used polypropylene (PP) as the feedstock and prepared the Ni-Fe/γ-Al₂O₃ bimetallic catalyst by impregnation, with activated carbon as the microwave absorber. The effects of absorber type (coconut-shell, wood-based, and coal-based), catalyst-to-absorber mass ratio (5:2, 5:3, 5:4, and 1:1), and microwave power (1200 to 1800 W) on hydrogen production were systematically examined, and XRD, SEM, and FT-IR were used to follow the phase evolution of the catalyst. Coconut-shell activated carbon offered favorable energy conditions for PP pyrolysis, as its well-developed microporous structure enabled efficient microwave absorption. Its self‑gasification also partially contributed to gas production. Under the optimal conditions of 5:4 catalyst-to-absorber mass ratio and 1600 W microwave power, H₂ yield reached 77.1 mmol/gₚₚ, H₂ efficiency 88.6%, and H₂ composition 80.1 vol.%, whereas CO, CO₂, CH₄, and C₂-C₅ were formed only as minor by-products. This study explored the synergistic behavior of the activated carbon absorber and the Ni-Fe catalyst in the microwave field, providing experimental data and process guidance for the valorization of waste plastics into hydrogen-rich gas.
Source: Research Square
Institution: Inner Mongolia University of Science and Technology
Language: English
Subfield: Fuel Technology
Field: Energy
Domain: Physical Sciences
Open Access status: green
Award: G4990127854
OpenAlex ID: W7234482260
