Surrogate-assisted multi-objective optimization of wavy-channel geometry and coolant velocity for cylindrical lithium-ion battery modules
Year: 2026
Type: article
Abstract: Introduction Effective thermal management is essential for maintaining safe operating temperatures and thermal uniformity in lithium-ion battery modules. This study investigates the coupled effects of wavy-channel geometry and coolant inlet velocity on the thermal performance of a 40-cell cylindrical 18650 lithium-ion battery module under a steady 4C heat load. Methods Channel-wall thickness, channel height, and coolant inlet velocity were selected as design variables. Forty-five configurations generated using Latin hypercube sampling were evaluated by computational fluid dynamics. Gaussian process regression models were developed for the maximum cell temperature (Tmax) and module temperature difference (ΔT), and NSGA-II was subsequently employed for multi-objective optimization. A compromise solution was selected using the minimum normalized Euclidean distance to the ideal point and re-evaluated using full CFD. Results The GPR models achieved R 2 values of 0.9997 for Tmax and 0.9996 for ΔT, with corresponding RMSE values of 0.0195 K and 0.0205 K. NSGA-II generated 279 non-dominated solutions. The selected design was a = 0.664 mm, h = 65.000 mm, and v = 0.292 m s −1 . CFD re-evaluation yielded Tmax = 305.232 K and ΔT = 4.641 K, with GPR–CFD differences of 0.005% and 1.745%, respectively. Compared with the baseline design, Tmax and ΔT decreased by 0.361% and 19.048%, respectively, while the pressure drop increased by 10.744%. Discussion The results demonstrate that the proposed CFD–GPR–NSGA‐II framework can effectively identify a balanced thermal design for the investigated wavy‐channel battery module. The selected configuration substantially improves temperature uniformity, although this thermal benefit is accompanied by a measurable hydraulic penalty.
Authors: Nguyen Thi Thu Phuong(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Software, Visualization, Writing – original draft), Nguyen Thanh Cong(Formal analysis, Methodology, Validation, Writing – review & editing), Duong Ngoc Khanh(Formal analysis, Validation, Writing – review & editing), Nguyen Trung Kien(Validation, Writing – review & editing), Nguyen Minh Chau(Formal analysis, Methodology, Visualization, Writing – review & editing), To Ngoc Thien(Data curation, Investigation, Writing – review & editing), Nguyen Khac Minh(Validation, Writing – review & editing), Le Van Quynh(Conceptualization, Methodology, Project administration, Supervision, Writing – review & editing)
Language: English
Subfield: Automotive Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $1,418
OpenAlex ID: W7234493974
