Toward Closing the Loop for PEEK in Material Extrusion: Filament Production from Virgin and Recycled Feedstock
Year: 2026
Type: article
Abstract: Material extrusion (MEX) enables additive manufacturing of functional components from polyether ether ketone (PEEK). Given PEEK’s high cost, reintegrating production waste into the process chain is economically important. This study investigates PEEK filament production from virgin and recycled feedstock on a single-screw filament line. Following an analysis of process instabilities, the extruder screw, filament cooling system and die geometry were modified. Computational fluid dynamics (CFD) was used to evaluate 44 die variants; seven were manufactured and experimentally validated. At the measured mass flow rates, simulated pressure drops strongly correlated with measured melt pressures (r = 0.997). Simulations exceeded measured values by 3–10% for the 2.0 mm dies and by 48% for the 3.0 mm die. Forced-convection air cooling reduced the filament temperature at the guide rollers by 70–100 K and decreased ovality from 9.4% to 1.5%. Over 5 h of production, all diameter readings of the virgin-material filament remained within ±0.05 mm; after seven extrusion passes, 98% met this tolerance. Regrind from additively manufactured parts, likely owing to its flake-like particle geometry, yielded filament that missed the tolerance criterion. Tensile testing of low-crystallinity MEX specimens revealed no significant differences between virgin material and material extruded seven times.
Source: Polymers
Authors: Maximilian Nowka(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Validation, Visualization, Writing – original draft, Writing – review & editing), Peer Hach(Investigation, Writing – original draft, Writing – review & editing), Sarah Hartmann(Investigation, Writing – original draft, Writing – review & editing), Karl Hilbig(Funding acquisition, Project administration, Resources, Supervision, Writing – original draft, Writing – review & editing), Thomas Vietor(Funding acquisition, Project administration, Resources, Supervision, Writing – original draft, Writing – review & editing)
Institution: Technische Universität Braunschweig
Language: English
Subfield: Industrial and Manufacturing Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,258
Award: G9001387010
OpenAlex ID: W7234497666
