Three-dimensional CFD simulation of urban drainage confluence flows using a validated Reynolds Averaged Navier–Stokes (RANS) k-ε turbulence model
Year: 2026
Type: article
Abstract: Urban drainage confluences exhibit complex flow dynamics that can induce hydrodynamic instabilities, sediment deposition and localised flooding. In this research, a validated 3D Reynolds averaged Navier–Stokes (RANS) k-ε turbulence model was developed and applied to investigate the influence of change in confluence angle and discharge ratio on flow conditions at an existing urban drainage confluence with a multi-cell box culvert. The results suggest that the standard k-ε framework can reproduce dominant large-scale velocity structures and mixing behaviour in the confluence under varied flow conditions. The findings indicate that lower confluence angles enhanced momentum exchange between tributary and main-channel flows while reducing flow separation, recirculation and backwater effects during peak flows. The results also revealed tributary hydraulic suppression in which the higher momentum of the main-channel flow restricted discharge through sections of the tributary multi-cell box culvert, causing localised stagnation and backwater effects. These findings can inform optimal redesign of urban drainage junctions experiencing failure conditions. Developed a 3D RANS k-ε turbulence model of an existing urban drainage junction with a multi-cell box culvertFlow velocity measurements undertaken in the field under varied flow conditions for model validationThe 3D RANS k-ε turbulence model captured dominant large-scale velocity structures and mixing patterns of the junction under wet-weather flow conditionsSimulated the effect of change of confluence angle and inflows on confluence flow dynamics.Confluence angles ≤30° promote efficient momentum exchange, limit separation and recirculation, and reduce backwater during peak flows. Developed a 3D RANS k-ε turbulence model of an existing urban drainage junction with a multi-cell box culvert Flow velocity measurements undertaken in the field under varied flow conditions for model validation The 3D RANS k-ε turbulence model captured dominant large-scale velocity structures and mixing patterns of the junction under wet-weather flow conditions Simulated the effect of change of confluence angle and inflows on confluence flow dynamics. Confluence angles ≤30° promote efficient momentum exchange, limit separation and recirculation, and reduce backwater during peak flows.
Source: Figshare
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7234519112
