Shear Behavior of 3D-Printed Embossed Textured Geomembrane and Geosynthetic Clay Liner Interface
Year: 2026
Type: article
Abstract: The stability of waste containment facilities is critical for protecting the environment and contributing to sustainability, which is highly reliant on the interfacial strength of the composite liners consisting of a layer of geomembrane (GM) and a layer of geosynthetic clay liner (GCL). This study investigated the shear behavior of the GM–GCL interface with 3D-printed embossed textured geomembranes (3D-GMTEs) using large-scale direct shear tests under normal stresses of 100, 200, and 400 kPa. The asperity height, diameter, and spacing of the 3D-GMTEs were varied independently to evaluate their effects on interfacial shear strength. The 3D-GMTE–GCL interface showed similar overall shear stress–displacement responses to those of the commercial GMTE–GCL interface, but its large-displacement strengths were higher. The results show that, at 200 kPa, increasing asperity height from 0.5 mm to 1.0 mm increased the peak and large-displacement strengths by approximately 311% and 220%, respectively. The diameter associated with the highest peak and large-displacement strengths was 2 mm at 100 kPa and 3 mm at 200 and 400 kPa, whereas increasing asperity spacing from 4 mm to 16 mm consistently reduced shear strength. As asperity height increased from 0.5 mm to 1.5 mm, the peak and large-displacement friction angles increased from 9° and 6° to 34° and 20°, respectively. At 400 kPa, all interfaces remained compressive, with a final compression of 0.72 mm for the reference geometry. Post-shear photographs provided qualitative evidence of asperity deformation, localized penetration, fiber disturbance, bentonite extrusion, and shear striations. These findings establish a fundamental relationship between asperity-scale geometry and GMTE–GCL interface performance, providing mechanistic insights for the rational design of reliability, protecting the surrounding environment from waste contamination, and contributing to sustainability.
Source: Sustainability
DOI: 10.3390/su182211673
Authors: Juan Hou, Shen Lu, Xuelei Xie
Institutions: Shanghai University, Qinghai University
Language: English
Subfield: Civil and Structural Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
Awards: G3782726438, G9001387547
OpenAlex ID: W7234540305
