Work

Nano-dendritic surface-engineered porous transport electrode for enhanced PEMWE performance

Year: 2026
Type: article
Abstract: Decreasing Ir catalyst loading and increasing its utilization are key focuses of the proton exchange membrane water electrolyzer (PEMWE) industry. In the context of keeping anode Ir loading low (<0.25 mg/cm 2 ), this study develops a porous transport electrode (PTE) configuration by fabricating an electroplated Pt-based nanodendritic surface on a sintered porous transport layer (PTL) for Ir catalyst sputter deposition. Such an ink-free PTE configuration is then compared with the IrO x ink-based anode catalyst-coated membrane (CCM) and PTE configurations with similar Ir loading. Nano-dendritic Pt surface on PTL led to improved oxygen evolution reaction (OER) kinetics and lower ohmic losses during PEMWE operation. After 300 h of accelerated stress testing (AST), the surface-engineered PTE configuration demonstrated better durability, with a 7.9% increase in output voltage at 2.0 A/cm 2 and a 13.9% increase in high-frequency resistance (HFR). In contrast, higher voltage degradation (12.2%) and HFR increase (22.1%) were observed for the CCM configuration. Post-AST SEM analysis revealed loss of structural integrity in the CCM configuration, with cracks and delamination in the catalyst layer. These results highlighted the capability of an ink-free, nano-dendritic, surface-engineered PTE configuration for high electrical conductivity, HFR stability and improved OER kinetics with low Ir loading in PEMWE operation.
Language: English
Open Access status: hybrid
Estimated APC paid: $4,230
OpenAlex ID: W7234542499
FWCI:
Cites: 53
Cited by:
Related to: 10