Work

Effects of Spatial Loss Mapping and Two-Phase Interface Treatment on the Thermal Prediction of a Direct-Oil-Cooled Traction Motor: A Combined CFD and Dynamometer Study

Year: 2026
Type: article
Abstract: Direct oil cooling allows traction motors to reach high power densities, but their temperature fields are difficult to predict because the electromagnetic losses are spatially non-uniform and the oil–air flow inside the machine is strongly two-phase. This study couples three-dimensional finite element (FEM) losses with conjugate computational fluid dynamics (CFD) for an 8-pole, 48-slot direct-oil-cooled interior permanent magnet traction motor and evaluates two modelling choices against dynamometer tests. Losses were applied either as a homogeneous loss density (HLD) or as a spatial loss distribution (SLD) mapped from the FEM to the CFD mesh by inverse distance weighting. The oil–air flow was solved with a pseudo-transient volume-of-fluid model using a sharp or a dispersion interface treatment. Nine winding and two housing temperatures were measured under continuous load (205 Nm, 4400 r/min) and, as a supplementary check, instantaneous load (400 Nm, 3000 r/min). Under continuous load, the dispersion–HLD model overpredicted the cold-side winding temperature rise by 36.3%, whereas the sharp–SLD model reduced the errors to 4.7%, 1.4% and 0.8% for the cold-side winding, hot-side winding and housing groups. The interface treatment dominated, and SLD gave a consistent secondary improvement. The imposed losses plus the computed churning and bearing losses matched the measured total loss within 5%.
Source: Machines
Language: English
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7234582090
FWCI:
Cites:
Cited by:
Related to: 10