Machine-Learning-Assisted Multi-objective Screening of Hardness and Oxidation Resistance in Refractory High-Entropy Alloys
Year: 2026
Type: article
Abstract: Refractory high-entropy alloys (RHEAs) exhibit excellent mechanical strength and thermal stability, but their practical application is frequently limited by insufficient oxidation resistance. This study develops a machine-learning-assisted workflow for multi-objective screening of hardness and isothermal oxidation resistance in RHEAs. The selected baseline hardness XGBoost model and baseline oxidation random forest model achieve held-out R 2 values of 0.79 and 0.76, respectively. The current fitted models screen 109,571 quinary compositions and are compared with six alloys fabricated following an initial ML-assisted multi-objective selection targeting contrasting hardness–oxidation trade-offs. Among these alloys, HHHO_2 exhibits the highest measured hardness of 780 ± 8 HV, whereas LHHO_1 exhibits the lowest specific mass gain of 2.75 ± 0.04 mg/cm 2 , corresponding to an oxidation-resistance index I ox of − 0.44 after oxidation at 1000 °C for 20 h. The comparatively large oxidation-prediction errors motivate development of a time-resolved oxidation model incorporating oxidation duration and a composition-weighted Pilling–Bedworth ratio. Within the complete feature set, gradient boosting achieves a five-fold cross-validation R 2 of 0.92 ± 0.02 and a held-out R 2 of 0.94. For three further alloys selected using the initial advanced-model predictions, the advanced model reduces the mean absolute I ox prediction error from 0.46 to 0.21, representing an approximately 53% reduction relative to the baseline oxidation model. The refined HHHO candidate exhibits a hardness of 661 ± 11 HV and a specific mass gain of 6.20 ± 0.01 mg/cm 2 . Repeated out-of-fold SHAP and cross-model ranking analyses are used to assess the robustness of the learned associations, while multivariate applicability-domain analysis identifies candidates requiring extrapolative interpretation. Overall, the workflow provides an experimentally informed approach for prioritizing RHEA compositions with different hardness–oxidation trade-offs while explicitly accounting for model variability and compositional applicability.
Source: High Entropy Alloys & Materials
Authors: Wei-Chih Lin, Stéphane Gorsse, An-Chou Yeh
Language: English
Topic: High Entropy Alloys Studies
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $2,490
Funder: National Tsing Hua University
OpenAlex ID: W7234591970
