Comparative Experimental and Numerical Investigation of Pure Rolling Gear Pairs with Different Tooth-Profile Definitions
Year: 2026
Type: article
Abstract: Traditional gear transmission involves relative sliding between mating tooth flanks, which can cause frictional losses and influence transmission efficiency, thermal response, and dynamic performance. This study compares three gear pairs: Type N (pure rolling gears with a circular-arc tooth profile in the normal section), Type T (pure rolling gears with a circular-arc tooth profile in the transverse section), and Type INV (involute helical gears). The loaded transmission error (LTE) characteristics of Type N and Type T are compared over eight helix angle conditions from 10° to 45°. Transmission efficiency and sound pressure level are experimentally evaluated for all three gear pairs over a speed range of 200–450 rpm and a load-torque range of 1–6 N·m. Infrared thermography is used to compare the thermal response of Type N and Type INV after 1 h of continuous operation at 6 N·m and input speeds of 400 and 500 rpm. The LTE comparison indicates that Type T exhibits lower peak-to-peak LTE than Type N over the investigated helix angle range, with non-monotonic variations for both types. At 400 rpm and 6 N·m, the transmission efficiencies of Type N, Type T, and Type INV are 98.795%, 98.305%, and 96.204%, respectively, while their corresponding sound pressure levels are 74.71, 72.78, and 77.16 dB(A). Type N also exhibits a lower meshing-region temperature rise than Type INV at both thermal-test speeds. The results reveal distinct motion-transmission, energy-transmission, acoustic, and thermal characteristics among the investigated tooth-profile designs.
Source: Machines
Authors: Chonghua Zhu(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Software, Validation, Writing – original draft, Writing – review & editing), Xikai Xiang(Investigation, Validation), Zixin Fang(Data curation, Validation), Zhiji Zou(Validation), Hui Yang(Conceptualization, Methodology), Xiaoping Xiao(Methodology), Zhen Chen(Funding acquisition, Project administration, Resources, Supervision)
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $2,896
OpenAlex ID: W7234625616
