Work

Bubble Pressure and the Brittle Zone in Deep Greenland Ice: Overburden, Trapped Air and Core Fracture Depths

Year: 2026
Type: article
Abstract: Ice drilled from several hundred metres down often arrives at the surface shattered, while shallower and deeper ice arrives intact. The brittle zone is a pressure story: bubbles sealed at low pressure are squeezed by overburden as the ice descends, and the stored pressure fights the core the moment the drill relieves it. Overburden pressure grows linearly with depth; bubble pressure follows it with a creep-relaxation lag, and fracturing is expected where the bubble-to-atmosphere pressure difference, once the core is cut free, exceeds the tensile strength of the ice, until clathrate conversion removes the bubbles and the mechanism with them. Headline values are sealing pressure mpa brt = 0.066; relaxation fraction brt = 0.3; tensile strength mpa brt = 1; overburden gradient mpa per 100m brt = 0.8996; overburden at 400m mpa brt = 3.375; overburden at 1000m mpa brt = 8.773. The pressure difference crosses the tensile threshold near four hundred metres and stays above it until clathrate conversion relieves the bubbles near and below a thousand metres, bracketing the observed brittle interval of the Summit cores from pressure arithmetic alone.
Language: English
Open Access status: green
OpenAlex ID: W7234718760
FWCI:
Cites:
Cited by:
Related to: 10