Stability of Barrier Layer Stacks Against Aluminum for Solar Cells With Poly‐Si/SiO x Passivating Contacts
Year: 2026
Type: article
Abstract: We show that SiC x ‐ and TiO x /TiN x ‐based layer stacks can be used as a high‐quality barrier coating for the metallization of the polycrystalline silicon/tunnel oxide passivated rear side of silicon solar cells by screen printed and sintered aluminum pastes, while maintaining the high passivation quality. The layer stacks are produced by physical vapor deposition (PVD) in case of TiN x and TiO x , and plasma enhanced chemical vapor deposited (PECVD) in case of SiC x . Structural properties are determined by X‐ray diffractive (XRD) measurements. Their barrier functionality, i.e., the impact of full‐area Al printing and firing onto the barrier‐protected passivating contacts, is assessed by measurements of the i V oc of dedicated samples before and after metallization, determined by photoconductance decay measurements. Finally, the long‐term stability of the barriers against diffusion of Al is assessed by i V oc measurements of metallized samples during accelerated aging tests at elevated temperatures. Both the stability against Al paste during the contact firing process and long‐term stability against Al diffusion at elevated temperatures of 85°C for ~1000 h are demonstrated. Especially the combined SiC x /TiO x /TiN x coatings enable only negligible i V oc losses during both processes. Very low contact resistivities through TiO x /TiN x barriers have already been shown elsewhere by the authors.
DOI: 10.1002/pip.70152
Authors: Heiko Plagwitz(Conceptualization, Investigation, Methodology, Validation, Visualization, Writing – original draft), Benjamin Gapp(Conceptualization, Investigation, Methodology, Validation), David Bäurle(Investigation), Emanuel Auerbacher(Investigation), Barbara Terheiden(Conceptualization, Funding acquisition, Project administration, Resources, Supervision, Validation, Writing – review & editing)
Institution: University of Konstanz
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: hybrid
Estimated APC paid: $5,150
OpenAlex ID: W7234720072
