Work

Wave-to-water energy balance of an S-shaped buoy and ball-screw power take-off driving small-scale batch reverse osmosis

Year: 2026
Type: preprint
Abstract: Small wave energy converters can supply fresh water off the grid only if every link between the sea and the membrane is accounted for. This study couples a time-domain model of the S-shaped buoy SB-1.5 and its ball-screw power take-off (PTO), both experimentally verified in earlier work, with a batch seawater reverse osmosis (RO) model based on solution–diffusion transport, film-theory concentration polarisation, and Pitzer osmotic pressure. The PTO law is anchored to the published bench power and to a mean-to-peak ratio of 0.26 measured from the oscilloscope records, and the buoy follows the Cummins equation calibrated to the published 22 W full-scale absorbed power. In the ShiDao wave climate (2.0 kW/m), the unit absorbs 54.0 W (capture width ratio 1.83%), delivers 19.2 W of electricity and passes 7.3 W of hydraulic power to a 0.6 m² membrane element. With a batch cycle at 30% recovery, this gives about 142 L/day (51.7 m³/yr) at 0.83 g/L, whereas a fixed-pressure once-through module on the same chain gives 10.5 L/day. The hydraulic energy of 1.23 kWh/m³ is about 1.4 times the least work of separation, and the motor–pump set, at 48% stage efficiency, is the weakest link. Monte Carlo and Sobol analyses bound the output at 115–171 L/day (5–95%), with motor–pump efficiency alone explaining 58% of the variance. The simulation is calibrated to published bench tests and full-scale values, and sea trials are the next step. An unconstrained linear damper would absorb 2.6 times more power than the rating-limited PTO, and a 100 W generator raises the annual permeate from 51.7 to 79.6 m³. One unit provides 15 L/day per person for about nine people (volume only, before post-treatment), and eleven units cover a village of one hundred.
Language: English
Open Access status: green
OpenAlex ID: W7234740195
Cites: 30
Cited by:
Related to: 10