Work

Advanced detection of small mortar defects in ceramic cladding via active thermography

Year: 2026
Type: article
Abstract: Ceramic cladding detachment resulting from incomplete mortar filling is a pathological manifestation in building facades, posing safety risks and maintenance costs. While infrared thermography is a prominent non-destructive tool, current literature remains largely constrained to qualitative assessments and macroscopic defects, leaving a knowledge gap regarding the quantitative limits of detecting small, early-stage discontinuities. This study addresses this limitation by applying active infrared thermography in reflection mode to systematically evaluate the detectability limits of small artificial mortar defects, ranging from 5 × 5–20 × 20 mm² (thicknesses from 1 to 4 mm), embedded in a representative full-scale specimen. Two heating configurations, general and localized, were combined with four post-processing techniques based on temporal decomposition and principal component analysis, with performance quantitatively assessed through the signal-to-noise ratio. The results showed that defect thickness was an important factor within the evaluated specimen configuration, in which it is associated with defect position and depth. Discontinuities of 3 and 4 mm produced expressive thermal contrasts under most evaluated conditions, whereas 1 mm defects remained highly sensitive to excitation and processing configurations. A heating duration of 120 s provided the best overall balance between thermal contrast and signal quality. Specifically, principal component thermography combined with nonlinear enhancement under general heating and principal component thermography under localized heating yielded the highest mean SNR at 120 s (0.88 and 0.91, respectively). By producing a measurable thermal response for defects as small as 5 × 5 mm² under specific excitation and processing configurations, this work indicates the potential of short-duration excitation protocols combined with quantitative post-processing for ceramic cladding inspection.
Language: English
Open Access status: hybrid
Estimated APC paid: $4,540
OpenAlex ID: W7234934591
FWCI:
Cites: 69
Cited by:
Related to: 10