Low-Power Two-Stage Miller-Compensated CMOS OTA in 45 nm Technology with a 180 nm Comparison for Active Low-Pass Filter Applications
Year: 2026
Type: article
Abstract: This paper presents a low-power two-stage CMOS operational transconductance amplifier (OTA) designed in 45 nm technology, together with the same architecture built in 180 nm technology for comparison. The OTA has an NMOS differential input stage with a PMOS current-mirror active load, followed by a common-source second stage with Miller compensation. The 45 nm design runs from a 1.1 V supply at a 10 µA bias current and has been taken through the complete flow of schematic simulation, layout, LVS, post-layout simulation and process-corner analysis. It gives a DC gain of 60.9 dB, a unity-gain frequency (UGF) of 17.4 MHz, a phase margin of 75.8° and a power of 42.7 µW at the schematic stage, and 61.0 dB, 11.9 MHz, 59.3° and 42.9 µW after layout. Across SS and FF corners from −40 to 125 °C, the gain stays between 58.9 and 61.3 dB. The 180 nm design uses the GPDK 180 nm process at 1.8 V. Its bias current was swept from 5 µA to 30 µA and 20 µA was chosen as the operating point, giving a DC gain of 66.01 dB at 36 µW. It has been taken through layout, DRC and a clean LVS, while its post-layout simulation is still to be done. The suitability of the OTA as the transconductance element of a Gm-C active low-pass filter is also discussed.
Institution: Global Academy of Technology
Language: English
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: green
OpenAlex ID: W7234946749
