Synthesis and Performance of Salt‐Resistant Acrylamide‐Based Copolymer Containing Sulfobetaine, PEG Fragment, and Hydrophobic Group
Year: 2026
Type: article
Abstract: A novel copolymer was synthesized via free‐radical polymerization of acrylamide (AM), polyethylene glycol monoallyl ether (APEG400), a sulfobetaine‐functional monomer (PD), and hexadecyldimethylallyl ammonium chloride (C16DMAAC). Single‐factor optimization yielded optimal conditions: a monomer mass ratio (AM: PD: APEG400: C16DMAAC) of 94.8:3:1:1.2, 15 wt% total monomer concentration, 0.3 wt% initiator loading, 50°C, and 5 h reaction duration. Under these optimal conditions, the polymerization yield was 93.4%. The copolymer exhibits favorable thermal stability, salt tolerance, and shear resistance with pronounced salt‐thickening behavior: its apparent viscosity increases monotonically with rising NaCl or CaCl 2 concentration. A 0.6 wt% aqueous solution (initial viscosity 8.87 mPa·s) reaches 531 and 489 mPa·s in 250 g/L NaCl and CaCl 2 , respectively. Particle size analysis shows D 50 of polymer aggregates first decreases then increases with salinity, accompanied by a broadened size distribution. This arises from salinity‐modulated electrostatic interactions between –SO 3 − and –R 4 N + moieties in PD units and enhanced hydrophobic association. TEM reveals CaCl 2 forms a denser network with smaller pores, while NaCl induces sheet‐like aggregation. This salt‐thickening copolymer holds great potential as a functional additive for enhanced oil recovery in high‐salinity reservoirs.
DOI: 10.1002/app.71816
Authors: Haiyang Tian(Conceptualization, Funding acquisition, Methodology, Project administration, Writing – review & editing), Xin Li(Data curation, Formal analysis, Writing – original draft), Yu Guo(Resources, Supervision), Yuan Liu(Investigation, Resources), Zhi Chen(Data curation, Validation), Wenhua Zhou(Investigation), Zhe Zhuo(Visualization), Lei Li(Supervision), Jiangwei Li(Software)
Language: English
Subfield: Polymers and Plastics
Field: Materials Science
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7234949583
