Year: 2026
Type: article
Abstract: In view of the growing research attention on hybridization of polymer composites for tribological benefits, this work is undertaken for a new class of multi‐fiber (glass and aluminium) reinforced epoxy composites filled with bamboo dust. This paper reports on the fabrication and on the wear performance evaluation of these composites based on a well‐designed experimental and analytical schedule. Dry sliding wear tests conducted on three different composite samples as per Taguchi's L 27 orthogonal array reveal that the addition of bamboo dust significantly improves the wear resistance of these composites. Analysis of variance (ANOVA) confirms that sliding velocity is the most influential factor affecting the specific wear rate (SWR) with a contribution of 72.08%, followed by filler content with a contribution of 22.47%. The Taguchi optimization also reveals that the minimum SWR of 0.0035 mm 3 /N·m is obtained at the optimal parameter combination of 100 cm/s sliding velocity, 500 m sliding distance, 20 wt% bamboo dust and 20 N normal load. The reliability of the developed model is verified using a confirmation experiment performed for a randomly chosen factor combination that shows a close agreement between the predicted and experimental value. Microstructure analysis of the worn surfaces reveals that fiber–matrix debonding, fiber fracture, crater formation, plastic deformation and excessive wear debris formation are the primary wear mechanisms responsible for material loss in these hybrid composites.
Source: Polymer Composites
DOI: 10.1002/pc.71871
Institution: National Institute of Technology Rourkela
Language: English
Topic: Tribology and Wear Analysis
Subfield: Mechanics of Materials
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7234956195
