Simulation-Based Performance Evaluation of Temporal Filtering for Angle-Scanned Ultrasonic Intrusion Monitoring
Year: 2026
Type: article
Abstract: Background/Objective: Short-range ultrasonic ranging is widely used in low-cost obstacle and perimeter monitoring, but single-sample threshold decisions frequently trigger false alarms under acoustic noise and transient outliers. This study evaluates deterministic temporal filtering strategies for an angle-scanned ultrasonic intrusion-monitoring system. Methods: Three lightweight decision rules suitable for 8-bit microcontrollers are compared: (A) direct distance thresholding at 20 cm, (B) a causal three-sample median filter followed by thresholding, and (C) causal median filtering followed by a two-consecutive-positive temporal confirmation rule. Algorithmic robustness is quantified across 30 independent Python simulation trials per Gaussian noise level (σ = 0.5 to 6.0 cm) with injected ±25 cm impulse outliers, alongside target-distance sweeps and 200-trial response-latency tests, complemented by a Tinkercad Arduino Uno virtual circuit model. Results: Causal median filtering reduces sample-level false-alarm rates from 1.45–2.07% (baseline) to 0.31–0.37% across all tested noise levels, and improves mean detection rate at σ = 6.0 cm from 79.32% to 87.17%. Adding two-sample temporal confirmation lowers sample-level false alarms further to 0.26–0.32% and pre-event trial false alarms from 83.0% to 4.5% at σ = 6.0 cm, while increasing mean response delay to 2.20–2.66 samples. Conclusion: The results quantify a clear robustness-latency trade-off for embedded ultrasonic sensing and provide a structured baseline for physical hardware validation.
DOI: 10.64388/ire1725216
Institution: Rajiv Gandhi University of Knowledge Technologies
Language: English
Topic: Arduino and IoT Applications
Subfield: Electrical and Electronic Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: bronze
OpenAlex ID: W7235035291
