Design and Performance Analysis of an Electromagnetic Load-Reduction Thrust Bearing System for Large Hydro-Generators
Year: 2026
Type: article
Abstract: As hydro-generator units trend toward higher capacity and rotational speed, conventional thrust bearings face increasing challenges in terms of friction loss, pad temperature, and oil-film reliability. This paper presents an electromagnetic load-reduction thrust bearing system that employs a stationary iron core fixed to the concrete foundation and an active iron core coupled to the generator rotor, generating an electromagnetic axial force to offload up to approximately 80% of the total thrust load. Two distinct bearing design philosophies under load-reduction conditions were comparatively evaluated for three representative unit types: a high-speed pumped-storage unit (Yangjiang, 500 r/min), a giant hydro-generator unit (Baihetan, 107.1 r/min), and a conventional 300–500 MW Francis unit (Huangdeng, 111.1 r/min). Results show that retaining the original bearing geometry under load reduction provides significant benefits in pad temperature reduction and oil-film thickness increase but yields limited friction-loss reduction (85–92% of the full-load loss at 60% load). Conversely, redesigning the bearing pad area proportionally to the load reduction achieves a friction loss of 58–67.5% of the full-load value at 60% load, while maintaining acceptable operating parameters. The findings provide design guidance for applying electromagnetic load-reduction technology to different hydro-generator unit categories. The magnetic-circuit analysis served for preliminary structural sizing, and the final load capacity was verified by finite-element simulation.
Source: Energies
DOI: 10.3390/en19225550
Authors: Lijie Hu(Conceptualization, Data curation, Formal analysis, Investigation, Methodology, Visualization, Writing – original draft), Xiyang Zou(Conceptualization, Project administration, Supervision, Validation, Writing – original draft), Chao Guo(Investigation, Methodology, Validation, Writing – review & editing), Peihao Jiang(Data curation, Validation, Writing – review & editing), Chengyou Nan(Project administration, Supervision, Validation), Jian Wu(Project administration, Resources, Supervision)
Language: English
Subfield: Mechanical Engineering
Field: Engineering
Domain: Physical Sciences
Open Access status: gold
Estimated APC paid: $3,137
OpenAlex ID: W7235076240
